Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 125
Note
f For DVI-D signal, HDMI signal, SDI signal, and DIGITAL LINK signal, conrm that the [SIGNAL LEVEL] setting is correct before black level
adjustment. (SDI signal is supported only for PT-DZ21K2, PT-DS20K2, PT-DZ16K2)
[CUT OFF]
Each red, green, and blue color component can be removed.
1) Press as to select [CUT OFF].
2) Press the <ENTER> button.
f The [CUT OFF] screen is displayed.
3) Press as to select [RED], [GREEN], or [BLUE].
4) Press qw to switch the item.
[OFF] Disables cutoff.
[ON] Enables cutoff.
Note
f When input is switched or a signal is switched, the cutoff setting returns to its original setting (off).
To Next Page
Loading...
