Chapter 1 Preparation — Precautions for use
20 - ENGLISH
Make a clearance of at least 5 mm (3/16") between the projector bottom and the setting surface by inserting
spacers (metallic) between them.
Screw holes for ceiling mount
(M6)
Adjustable feet
Clearance (5 mm (3/16") or longer)
Ensure the inflow of air into the air intake port. Otherwise the
projector may not work properly.
Spacer
Mount
Positions of screw holes for ceiling mount and
adjustable feet
Adjustable feet
f Do not stack projectors on top of each other.
f Do not use the projector supporting it by the top.
f Do not use the projector tilted at an angle that exceeds ±15° from the horizontal plane.
f Do not block the ventilation ports (intake and exhaust) of the projector.
f Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and
exhaust) of the projector.
+15° or less
-15° or less
100 mm (3-15/16") or longer
500 mm (19-11/16") or longer 500 mm (19-11/16") or longer
500 mm (19-11/16") or longer
To Next Page
Loading...
