11.11. Removal of Analysis Block
(1) Remove the upper case according to the section 11.2. "Removal
of Upper Case".
(2) Loosen the 2 screws until they idle and open the exhaust fan
units 1 and 2 outside.
(3) Loosen each of 2 screws fixing the lamp units until they idle,
remove the lamp units 1 and 2.
(4) Unscrew the 2 screws and remove the CW fan fixing metal with
fan and the cooling plate.
(5) Unscrew each of 1 screw and release the 2 igniter boxes.
(6) Unscrew the 1 screw for the lamp unit 1 terminal.
(7) Unscrew the 1 screw for the lamp unit 2 terminal.
(8) Unscrew the 1 screw and remove the thermofuse.
29
PT-D5700U / PT-D5700E / PT-D5700UL / PT-D5700EL / PT-DW5100U / PT-DW5100E / PT-DW5100UL / PT-DW5100EL
To Next Page
Loading...
