As of April 2013
SFD12M023
17/17
S PEC F ILE
PT-DZ10K
3-Chip DLP
™
Projector
Operating the projector continuously
1. If the projector is to be operated continuously one week, use the dual-lamp optical system’s alternating lamp
operation (lamp relay) function. The projector cannot be operated continuously one week in dual-lamp mode.
Allow a minimum of two hours per day of non-operation time for each lamp if the projector is to be operated
continuously for more than one week.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
DLP and the DLP logo are trademarks of Texas Instruments.
P
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
JLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
All other trademarks are the property of their respective trademark owners.
Direction of air intake and exhaust
Intake
Exhaust
SHUTTER
LENS
ENTER
AUTO
MENU
SETUP
VIDEO
S-VIDEO
RGB1
RGB2
DVI-D/HDMI
SDI
To Previous Page
Loading...
