NETWORK menu
PROJECTOR NAME→ ■ See page 10
You can change the name of the projector.
WIRED LAN→ ■ See page 11
You can make detailed wired LAN settings.
WIRELESS LAN ■
_
→ See page 12
You can make detailed wireless LAN settings.
NETWORK CONTROL→ ■ See page 15
This sets the network control method.
NETWORK PASSWORD→ ■ See page 16
Set this to [ON] if you want to restrict the connection by setting a password when connecting with the projector
using the “Wireless Manager mobile edition 5.5”.
(Default: OFF)
NETWORK PASSWORD CHANGE→ ■ See page 16
You can change the password for the network connection.
LIVE MODE CUT IN→ ■ See page 17
Set this to [ON] if you allow another user in the live mode to cut in while you are in the live mode (sending the
screen images) using the “Wireless Manager mobile edition 5.5”.
(Default: OFF)
COMPUTER SEARCH ■
_
→ See page 17
You can search computers that can connect using the “Wireless Manager mobile edition 5.5”.
MULTI-LIVE→ ■ See page 17
Use this when connecting with a computer using the “Wireless Manager mobile edition 5.5”.
NETWORK STATUS→ ■ See page 18
This displays the network status of the main unit.
You can configure settings when the wireless module (ET-WM200E/ET-WM200U) is mounted. _
To Next Page
Loading...
