Panasonic PT-EW630U

-18-
Attaching the lens to the projector

1. Remove the lens mount cove r.
2. Fit the lens to the projector by aligning the red dot on the
lens with the red dot of the projector.
3. Slowly turn the lens clockwise until it clicks. Make sure
that the lens is fully inserted to the projector.
ò
Do not press the lens release button when attaching the lens.
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales
dealerfordetailedinformationoftheoptionallensspecications.
Removing the lens

1. Press and hold the
<LENS>
button or
<LENS SHIFT>
button for more than 5 seconds to make the lens return
to the central position.
2. Turn off the projector and unplug the AC power cord.
3. While pressing the lens release button, rotate the
projection lens counterclockwise, and remove the
projection lens.
ò
Be careful when handling the lens. Do not drop.
Lens release button
Red dots
Removing and attaching the projection lens
Maintenance