Panasonic PT-EW630U

-5-
Specifications
Model No. PT-EX600U / E / UL / EL PT-EW630U / E / UL / EL
Power supply
AC100 V - 240 V 50 Hz/60 Hz
Power consumption
100 V - 240 V 4.9 A-2.0 A 490 W
When [Standby mode] of [Setting] is set to [ECO]: 0.4 W
When [Standby mode] of [Setting] is set to [Network]: 11 W
When [Standby mode] of [Setting] is set to [Normal]: 15 W
LCD panel
Panel size
1.93 cm(0.8")
(aspect ratio 4 : 3)
1.91 cm(0.75")
(aspect ratio 16 : 10)
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
786 432
(1 024 x 768) x 3 panels
1 024 000
(1 280 x 800) x 3 panels
Lens*1
Motorised zoom (1.6x) / Motorised focus
F 1.7 to 2.3, f 26.9 mm to 45.4 mm
Luminous lamp
330 W UHM lamp
Light output *2
6 000 lm 5 500 lm
Appli-
cable
scanning
frequency
*3
for RGB signal
Horizontal 15 kHz to 120 kHz, Vertical 48 Hz to 100 Hz
Dot clock frequency: up to 140 MHz
for YPBPR signal
[525i(480i)] Horizontal 15.75 kHz, Vertical 60 Hz
[525p(480p)] Horizontal 31.5 kHz, Vertical 60 Hz
[750(720)/60p] Horizontal 45 kHz, Vertical 60 Hz
[1 125(1 080)/60i]Horizontal 33.75 kHz, Vertical 60 Hz
[625i(576i)] Horizontal 15.63 kHz, Vertical 50 Hz
[625p(576p)] Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/50p] Horizontal 37.5 kHz, Vertical 50 Hz
[1 125(1 080)50i] Horizontal 28.13 kHz, Vertical 50 Hz
•HD/SYNCandVterminalsarenotcompliantwith3valuecompositeSYNC
for Video signal (in-
cluding S-Video)
Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hz
for HDMI signal
525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1 125(1080)/60p,
1 125(1 080)/50p, 1 125(1 080)/60i, 1 125(1 080)/50i
•Displayable resolution: VGA to WUXGA (non-interlace)
•Dot clock frequency: up to 162 MHz
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
1.01 m-10.1 m(40"-400")
Screen aspect ratio
4 : 3 16 : 10
Projection scheme
Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker
1(3.7 cm round-type)
Maximum usable volume output
10W
Contrast ratio *1
5 000 : 1 (all white / all black)
*1: It is only for the model which with lens.
*2: Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*3: For details of video signals that can be projected using this projector, refer to “List of compatible signals”.