Panasonic PT-EW630U

-54-
Electrical Adjustments
Service adjustment data
The adjustment items indicated with “[” are required to
readjust following to the “Electrical adjustments”. Other
items should be used with the initial data value.
Group/
Item
Item Name Function Range Initial Note
Group
0
AD Converter (PW392)
3 ADC G-GAIN
YYCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50) /
SCART
0 - 1023
(265)/200/210/ 210
/210/265
* Not effective PC
4 ADC R-GAIN
PC/YCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50) / SCART
0 - 1023 (265)/205/210/ 210/210/265 * Not effective PC
5 ADC B-GAIN
PC/YCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50) / SCART
0 - 1023 (265)/205/210/ 210/210/255 * Not effective PC
10 SOGTH RGB/COMPONENT / SCART 0 - 15 (2)/4 / 4
11 SOGHYSDIS RGBCOMPONENT / SCART 0 - 1 (1)/1 / 0
12 HS1TH
H Sync1 Threshold RGB/COMPONENT /
SCART
0 - 15 (4)/4 / 4
13 HS0TH
H Sync0 Threshold RGB/COMPONENT /
SCART
0 - 15 (4)/4 / 4
Group
10
AD Converter (ISL51002/ISL98001)
3 ADC G-GAIN
PC/YCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50)
0 - 1023
290/(170/185/
200/200)
*Effective only PC
4 ADC R-GAIN
PC/YCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50)
0 - 1023
290/(140/165/
165/165)
*Effective only PC
5 ADC B-GAIN
PC/YCbCr 480i (575i) / YCbCr 480p (575p) /
YCbCr 720p (720p50) / YCbCr 1080i (1035i,
1080i50)
0 - 1023
290/(140/165/
165/165)
*Effective only PC
Group
20
Video Decoder
0 Y Level
Composite 60Hz/ S-Video 60Hz/ Composite
50Hz / S-Video 50Hz- Y Level (ADC RGB
Gain)
0 - 1023 175/175/185/185
1 C Level
Composite 60Hz / S-Video 60Hz / Composite
50Hz / S-Video 50Hz - C Level (ADC Satura-
tion)
0 - 1023 405/405/440/440
10 XCXL Parameter XCXL Level 0 - 4 2
11 Sync Amp Low
Minimum sync amplitude threshold for HLOCK
1 to 0 transition
0 - 9999 0x0700
12 Sync Amp High
Minimum sync amplitude threshold for HLOCK
0 to 1 transition
0 - 9999 0x1000
13 Luma Setup Enable 7.5IRE Mode (NTSC only) 0 - 1 0
14 Anti-Alias Filter Anti-Alias Filter 0 - 7 4
15 Anti-Alias Downsample Anti-Alias Downsample 0 - 3 0
16 Anti-Alias High Frequency Anti-Alias High Frequency 0 - 3 3
20
Comb 3D Cross-Luma Top/Bot-
tom Amplitude
for PAL/SECAM only 0 - 3 3
Group
30
HDMI(SIL9127A/MN864771A)
0 Long cable mode(for DVI) Channel1 0 - 1 0
1 Long cable mode(for HDMI) Channel2 0 - 1 0
Group
40
General
0 IP Mode
Set at IP OFF 0: Not used IP Block 1: Used IP
Block and IP OFF
0 - 1 1
1 3:2 PullDown Mode bit0: Global Motion bit1: Video Motion 1 - 3 1
2 Detect Film Mode Enable
0: 2:3pull down & 2:2pull down
1: 2:3pull down
2: 2:2pull down
0 - 2 0
3
NR Enable for Analog YUV 0 : Noise Reduction detected with Y and UV
motion
1 : Noise Reduction detected with Y motion
Analog YUV : PC/Video/S-Video/Component
Digital YUV : HDMI
<NSYUVEN>
0 - 1 1
4 NR Enable for Digital YUV 0 - 1 0
Group
41
Deinterlacer setting Progressive Mode1, Film Parameter
0 Motion Adaptive Weight Value <KDEINT> 0 - 255 30/30/30
1 Angle Interpolation Level 0 : Conservative <====> 4 : Aggressive 0 - 5 4/4/4
2 CUE Low Pass Filter Enable <CUELPFEN> 0 - 255 0/0/0