Mechanical Disassembly
13. Cable reforming
Reform the cables as shown in the figure below. Place the cables at the
original position after replacing the parts.
Thermal fuse
Guide
Lamp cover switch
Ferrite core
Wire band
hook
hook
hook
hook
hook
hook
Wire band
Note on fan's connection
- Fans (FN906, FN907, FN908) can be connected to any
of connectors (K78F, K78G, K78H) on the main board.
- Fans (FN909, FN910, FN911) can be connected to any
of connectors (K78J, K78K, K78L) on the main board.
To Next Page
Loading...
