Chapter 1 Preparation — Precautions for use
Precautions for use
Cautions when transporting
f
use. When transporting the projector, move the lens to the home position and attach the lens cushion and the lens cover.
use. When transporting the projector, move the projection lens to the home position, remove the Projection Lens, and then
attach the lens hole cover.
x.
Lens hole cover
Lens cushion
f
the internal components and result in malfunctions.
f
Cautions when installing
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f
or malfunction.
f
equipment, or the air from the air conditioner does not blow toward the front of the projector.
f
result in deformation of the outer case due to heat, which may cause malfunctions.
f
rBe sure to ask a specialized technician or your dealer when installing the projector on
a ceiling.
or
) *1
*1 Be sure to read x
r
r
station or the radio.
*
1
terminal by using a piece of metal foil or a metal pipe, of which is grounded at both ends.
*1
To Next Page
Loading...
