Chapter 4 Settings — [PROJECTOR SETUP] menu
Setting [NO SIGNAL SHUT-OFF]
before switching to standby can be set.
1) Press as to select [ECO MANAGEMENT].
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [NO SIGNAL SHUT-OFF].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE]
[10MIN.] - [90MIN.]
Setting [STANDBY MODE]
1) Press as to select [ECO MANAGEMENT].
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [STANDBY MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ECO]
[NORMAL]
Note
f
network function becomes operable during standby.
f
f
x
[SCHEDULE]
1) Press as to select [SCHEDULE].
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Enables the schedule function. Refer to x page 88) or
x for how to set the schedule.
Note
f
How to assign a program
1) Press as to select [SCHEDULE].
To Next Page
Loading...
