Chapter 2 Getting Started — Before the installation
ENGLISH - 33
Note
f Above illustrations for installation form are examples for explanation, and it may not be the actual condition of usage. Set the [SETUP] menu
→ [PROJECTION METHOD] (x page 68) and the [VERTICAL FLIP] (x page 68) according to the environment of the usage and the
direction of the main unit.
Projection direction
When using the projector in the projector mode, various expressions are possible by combination of adjustment
of the direction of the main unit as described in “Adjusting the projection position” (x page 36) and the settings
of the [SETUP] menu → [PROJECTION METHOD] (x page 68) and the [VERTICAL FLIP] (x page 68). The
direction of irradiation can be adjusted freely in similar manner when using the projector in the lighting mode.
Following illustration is an example when [PROJECTION METHOD] is set to [FRONT], and [VERTICAL FLIP] is
set to [OFF] for ceiling mount installation.
ABC
ABC
ABC
ABC
To Next Page
Loading...
