Panasonic PT-JW130FBE

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 83
3) Press as to select [PASSWORD CHANGE].
4) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
5) Press asqw to select a character, and press the <ENTER> button to enter.
6) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f Up to eight characters can be set for a password.
f A password is not set in factory default settings. Since connection without password entry is available even when [PASSWORD] is set to
[ON], be sure to set a password in [PASSWORD CHANGE] if you set [PASSWORD] to [ON].
f Change the password periodically and make it hard to guess.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2) Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[PROJECTOR NAME]
Displays the projector name set on the projector.
The projector name can be changed to a desired name. (x page 77)
[NETWORK ID]
Displays the network ID (xed) given to the projector.
[WIRED LAN]
Displays the network information of the wired LAN set on the projector.
[DHCP]
Displays the status of use of DHCP server.
[IP ADDRESS]
Displays the IP address.
[SUBNET MASK]
Displays the subnet mask.
[DEFAULT GATEWAY]
Displays the default gateway.
[DNS1]
Displays the address of the primary DNS server.
[DNS2]
Displays the address of the secondary DNS server.
[MAC ADDRESS]
Displays the MAC address of wired LAN.
[WIRELESS LAN]
Displays the network information of the wireless LAN set on the projector.
[ANTENNA LEVEL]
Displays the signal status of wireless LAN.
[NETWORK]
Displays the connection method of wireless LAN.
[CHANNEL]
Displays the channel used for wireless LAN.
[SSID]
Displays the string of SSID.
[AUTHENTICATION]
Displays the user authentication method.
[EAP]
Displays the type of EAP.
[ENCRYPTION]
Displays the encryption method.
[DEFAULT KEY]
Displays the number of the default key.
[DHCP]
Displays the status of use of DHCP server.
[IP ADDRESS]
Displays the IP address.
[SUBNET MASK]
Displays the subnet mask.
[DEFAULT GATEWAY]
Displays the default gateway.
[DNS1]
Displays the address of the primary DNS server.
[DNS2]
Displays the address of the secondary DNS server.
[MAC ADDRESS]
Displays the MAC address of wireless LAN.
Note
f When [DISABLE] is selected in the [NETWORK] menu → [WIRELESS LAN] (x page 78) and an item other than [WIRELESS LAN] is
selected in [Art-Net] (x page 83), the wireless LAN page on the [NETWORK STATUS] screen is not displayed.
[Art-Net]
Make settings to use the Art-Net function.