Control Commands
6.4. Basic Format
The data sent from the PC to the projector is transmitted in the format shown below.
Notes:
·
If sending multiple commands, check that a call back has been received from the projector for 1 command before sending
the next command.
·
When a command which does not require parameters is sent, the colon (:) is not required.
6.5. Control / Query Commands
10
PT-LB10NTU / PT-LB10NTE / PT-LB10U / PT-LB10E / PT-LB10VU / PT-LB10VE / PT-LB10SU / PT-LB10SE
To Next Page
Loading...
