8.6.3.1. Explanation of Buttons
Port:
Port name of PC which connects with the projector
Data:
Displays the data transmission/reception menu.
Adjustment:
Displays the adjustment menu.
Exit:
Exits this application.
8.6.4. Data Transmission / Reception
Menu
8.6.4.1. Explanation of Buttons
Micom Data Transmission:
Reads the microcomputer data from the file and transmits it
to the projector.
Micom Data Reception:
Receives the microcomputer data from the projector and
writes it in the file.
Gamma Data Transmission:
Reads the gamma data from the file and transmits it to the
projector.
Gamma Data Reception:
Receives the gamma data from the projector and writes it in
the file.
Uniformity Data Transmission:
Reads the color unevenness correction data from the file
and transmits it to the projector.
Uniformity Data Reception:
Receives the color unevenness correction data from the
projector and writes it in the file.
Exit:
Exits this application.
8.6.4.2. Receiving and transmitting of the
data
Click a target button and specify a file name.
8.6.5. Adjustment Menu
8.6.5.1. Explanation of Buttons
Input Level Adjustment RGB:
Displays the RGB input level adjustment menu.
Exit:
Exits this application.
8.8.2. Explanation of Buttons
OK:
Executes automatic sub contrast and sub brightness
adjustments, then closes this dialog.
Cancel:
Cancels this menu.
8.7. Flicker Adjustment
According to the procedure of chapter 5 "Flicker Adjustment Mode", minimize the flicker.
8.8. Input Level Adjustment
8.8.1. Adjustment Menu
26
PT-LB10NTU / PT-LB10NTE / PT-LB10U / PT-LB10E / PT-LB10VU / PT-LB10VE / PT-LB10SU / PT-LB10SE
To Next Page
Loading...
