Panasonic PT-LB2U

Getting started
16  ENGLISH
Connections
Preparations
Read and follow the operating instructions of each peripheral device and turn the peripheral devices off prior to •
making any connections.
Prepare the selected peripheral devices with the connection cables that correspond to the projector’s terminals.•
All peripheral devices and cables used for the connections are sold separately unless indicated otherwise.•
If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase •
correction is effective.
Conrm the types of video signals, • see “LIST OF COMPATIBLE SIGNALS”. (

page 50)
Example: AV equipment
LAN
S
ERIAL
CO
MPUTER 1 IN
S-VIDEO
O
IN
V
IDE
O
IN
A
UDI
O
IN
1
2
AUDI
O
OUT
T
COMPUTER 2 IN
S-VIDEO
IN
VIDEO IN AUDIO IN
1 2
AUDIO
OUT
NOTE:
Switch the audio connection manually for more than one AV equipment connections.•
To S-VIDEO
output
DVD player
Video player
To audio input
Audio system
To video output or
audio output
or