Panasonic PT-LB2U

Settings
36  ENGLISH
Menu operation (continued)
▌
WIDE MODE
Set this mode when projecting wide signals (16:9,
16:10, 15:9).
Change setting
Change
setting
Change
setting
Change setting
AUTO Automatic setting
OFF For 4:3 signals
ON For WIDE signals
▌
SXGA MODE
Set this mode when an SXGA signal is input and the
projected image is trimmed.
Change setting
Change
setting
Change
setting
Change setting
SXGA For normal projection
SXGA+ For projection when image is cropped
▌
OTHER FUNCTIONS
You can perform some of the remote control button
operations from the sub-menu.
AUTO SETUP
For details, see “SET UP THE IMAGE POSITION
AUTOMATICALLY”. (

page 23)
FREEZE
You can capture the projected image as a still picture.
While the image is frozen, the audio sound through the
projector will stop.
Press [RETURN] to escape.
The image is distorted momentarily when the projection
is stopped and restarted.
AV MUTE
You can temporarily stop projection and audio sound
when the projector is left idle.
Press [MENU] to escape.
INDEX-WINDOW
For details, see “INDEX-WINDOW display”.
(

page 24)
DIGITAL ZOOM
1.5
DIGITAL ZOOM
[

] button: zoom in
[

] button: zoom out
Press [ENTER] to select the enlargement.
Press [MENU] to escape.
The image is distorted momentarily when the image is
zoomed.
PROJECTOR SETUP MENU
Remote control Control panel
MENU
RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER
VIDEO
DEFAULT
FUNCTION
WIN.
INDEX-
MENU
ENTER
DEFAULT
STANDBY
(R)
ON(G)
LAMP
TEMP
MENU
FUNCTION
ENTER
INPUT
SELECT
MENU
ENTER
MENU
RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER
VIDEO
DEFAULT
FUNCTION
WIN.
INDEX-
MENU
ENTER
DEFAULT
STANDBY
(R)
ON(G)
LAMP
TEMP
MENU
FUNCTION
ENTER
INPUT
SELECT
MENU
ENTER
Set the selected item with [

].
▌
STATUS
You can check the projector’s status.
SIGNAL
NAME

Name of input signal
FREQUENCY

Scanning frequency of input signal
RUNTIME
PROJECTOR

Display the projector’s current usage
time
LAMP

Display the lamp’s current usage time