ENGLISH - 53
Note
f Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjustable or used for certain input signal formats. The menu items that cannot be adjusted or used are shown in
gray characters. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayed depending on the input signal.
f Some items can be adjusted even if signals are not input.
f Individual adjustment screen is cleared automatically if no operation is performed for approximately 5 seconds.
f For menu items, refer to “Main menu” (x page 53) and “Sub-menu” (x page 54).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f You cannot reset all the settings to the factory default at a time.
f To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR SETUP] menu →
[INITIALIZE ALL] (x page 81).
f Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
Page
[PICTURE] 56
[POSITION] 61
[LANGUAGE] 67
[DISPLAY OPTION] 68
[PROJECTOR SETUP] 74
[SECURITY] 82
[NETWORK]
*1
85
*1 Not available for PT-LB306.
Chapter 4 Settings - Menu navigation
To Next Page
Loading...
