80 - ENGLISH
f For PT-LB306
[COMPUTER]
Set the audio output when COMPUTER input is selected.
[VIDEO]
Set the audio output when VIDEO input is selected.
[HDMI]
Set the audio output when HDMI input is selected.
4) Press qw to switch the item.
f The sub items will switch each time you press the button.
f For PT-LW376, PT-LW336, PT-LB426, PT-LB386 and PT-LB356
[COMPUTER1]
Select between [AUDIO IN 1] and [AUDIO IN 2].
[COMPUTER2]
Select between [AUDIO IN 1] and [AUDIO IN 2].
[VIDEO]
Select between [AUDIO IN 1] and [AUDIO IN 2].
[HDMI1]
Select one item among [HDMI1 AUDIO IN], [AUDIO IN 1] or [AUDIO IN 2].
[HDMI2]
Select one item among [HDMI2 AUDIO IN], [AUDIO IN 1] or [AUDIO IN 2].
[NETWORK]
Select one item among
[NETWORK AUDIO IN]
, [AUDIO IN 1] or [AUDIO IN 2].
[MEMORY VIEWER]
Select between [AUDIO IN 1] and [AUDIO IN 2].
f For PT-LB306
[COMPUTER]
Select between [AUDIO IN 1] and [AUDIO IN 2].
[VIDEO]
Select between [AUDIO IN 1] and [AUDIO IN 2].
[HDMI]
Select one item among [HDMI AUDIO IN], [AUDIO IN 1] or [AUDIO IN 2].
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input
signal before performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The test pattern with the operation guide of [PATTERN CHANGE] is displayed.
3) Press qw to switch the test pattern.
f The test pattern will switch each time you press the button.
f When you press the <MENU> button or <RETURN> button, it will exit the test pattern and return to the
Sub-menu of [PROJECT SETUP].
All white
Select a test pattern so that it is easy to make vaious adjustments.
Color bar (Vertical)
Color bar (Horizontal)
White cross on the black
background
Black cross on the white
background
Cross hatch
Note
f The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the <FUNCTION> button.
[FILTER COUNTER]
Check the usage time of the air lter and set the cleaning cycle of the air lter. Also, the usage time of the air lter
can be reset.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
Chapter 4 Settings - [PROJECTOR SETUP] menu
To Next Page
Loading...
