Panasonic PT-LW271U

Setting up
ENGLISH -
21
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods to set the desired method in the projector.
Setting on a desk/oor and
J
projecting forward
Mounting on the ceiling and
J
projecting forward
Menu setting*
1
[Ceiling Mount] [Front]
Menu setting*
1
[Ceiling Mount] [Front Ceiling]
Mounting on the ceiling and
J
projecting from rear
(Using translucent screen)
Setting on a desk/oor and
J
projecting from rear
(Using translucent screen)
Menu setting*
1
[Ceiling Mount] [Rear Ceiling]
Menu setting*
1
[Ceiling Mount] [Rear]
For details about the menu setting, please refer to the [Position] menu → [Ceiling Mount]. (*1 :
Æ
page 39)
Parts for ceiling mount (Optional)
You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high
ceiling, ET-PKV100S: for low ceiling), the optional projector mount bracket ET-PKL300B.
Use only the ceiling mount brackets specied for this projector.
z
Refer to the installation instructions for the ceiling mount bracket when you install the bracket or hanger and
z
the projector.
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a
z
qualied technician.