30 - ENGLISH
Adjusting adjustable foot
Lift the front of the projector and press the foot lock latch with your nger to adjust the projection angle up and down. Release
your nger to lock the adjustable foot.
For slight adjustment, rotate the adjustable foot.
Rotate the adjustable foot to extend it as shown in the gure, and rotate it in the opposite direction to contract it.
Attention
f Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
the adjustable foot.
f If keystone distortion occurs on the projected image, perform [Keystone] from the [Expand] menu. (x page 62)
Adjustable range
Adjustable foot : 40 mm (1-9/16")
Foot lock latch
Chapter 2 Getting Started - Setting up
To Next Page
Loading...
