27
Click [Exit] in the launcher menu.
The following window appears.
1
Click [Yes].
The computer returns to the original network settings when the connection is ended.
However, note that some time may be needed to return to the original network settings.
Click [No] to return to the launcher.
2
Other operations for connection (cont.)
Exit Wireless Manager
When connecting the projector for the first time
The <Preservation of a Profile> window appears.
Create a profile with information about connected projectors.
You can use the created profile to connect automatically.
This function is called “One-click Connection”. (One-click Connection→ See page 26)
Set the save destination and file name, and click [OK].
If you do not need to create a profile, click [Close].
You can also exit by selecting [End] from the launcher menu.
To Next Page
Loading...
