43
You can make various settings related to Wireless Manager ME 5.5.
Setting options
Setting options
Click [Option] in the launcher menu.
The <Option> window shown to the right appears.
2
Click the desired tab to be set.
3
Click [OK].
4
Resolution
Select the quality of the image transmitted from the computer to the projector.
Live Mode Settings
• [Remove image when shutting down Live Mode]
Set this if you want to make images on the projector cleared at the end of live mode.
• [Disable Screen Saver]
This disables the computer screen saver function while Wireless Manager ME 5.5 is operating. Check this box to disable
screen saver operation during live mode.
• [Display sender’s name in Multi Live Mode]
The characters (max. 8) which have been entered are displayed at the upper right of the transmitted screen.
In the 4-screen and 16-screen index style modes, they are also displayed at the bottom of each image.
(Alphanumerics are not displayed when the check mark has been removed.)
• [Produce audio along with video during Live Mode]
You can set this when you want to output audio data from a projector in live mode. Furthermore, the launcher audio settings
are only effective when sound is output from the projector.
Sound can be output only in live mode.
• [Start Live Mode at the same time as connection]
Projection starts when the connection is made without having to click the live button.
Transmission
If you leave your PC unattended, note that a password-protected screensaver will be disabled, if [Disable screensaver] option is
enabled.
Click [ ].
The launcher menu will appear.
1
To Next Page
Loading...
