46
Network/Security setting of the projector
When making a connection between a computer and a projector with settings other than the default settings, perform the
procedure below to display the menu required when changing the initial settings. For detailed setting, see the operation manual
for your projector.
Select[NETWORK]withthe[▲▼]buttons.
The network menu appears.
2
Press the [MENU] button on the projector.
The main menu appears.
1
Displaying the Network Menu
• The screen shown above is an example of PT-FW300NTE.
• Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of
the functions. In the case of an item that cannot be adjusted or a function that cannot be used, the corresponding on-screen
item will not be displayed, and you will not be able to execute it even when you press the [ENTER] button.
• The displayed screen, name and operation vary depending on the type of projectors. (
See page 42)
To Next Page
Loading...
