Panasonic PT-LW80NT - Setting Network Number (for Wireless LAN); [USER] Settings; Setting IP

48
Select [WIRELESS LAN] at the network menu.
1
Select the number to be connected with the [ ] buttons.
2
Setting network number (for wireless LAN)
Network/Security setting of the projector (cont.)
You can configure more precise network settings, if you select from [USER1] to [USER3] (user) for [Wireless LAN] in the
network menu. For network settings, contact your network administrator.
[USER] settings
How to display IP address setting menu
Press[WIRELESSLAN]→[USER1]-[USER3]→[ENTER]atthenetworkmenu.
DHCP
※
:
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
※
],
[SUBNETMASK
※
] and [DEFAULT GATEWAY
※
].
※ “Glossary” (See page 64)
Setting IP
A wired LAN and wireless LAN cannot be used in the same segment.
Selecting [DISABLE] disables the wireless LAN.
• Network number
Off, [S-MAP], [1]-[4], [USER1]-[USER3]
RETURN
ENTER
SELECT
LANGUAGE
PROJECTOR SETUP
SECURITY
POSITION
DISPLAY OPTION
WIRED LAN
NAME CHANGE
PASSWORD
PASSWORD CHANGE
NETWORK STANDBY
NETWORK CONTROL
LIVE MODE CUT IN
COMPUTER SEARCH
MULTI-LIVE
STATUS
INITIALIZE
ON
OFF
OFF
OFF
PICTURE
NETWORK
S-MAP
WIRELESS LAN
WIRELESS DETAILED SETUP
NEXT CANCEL
RETURN
SELECT
ENTER
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
192.168. 11.100
OFF
192.168. 11. 1
255.255.255. 0
NAME CHANGE
USER1 1/3
USER1