Basic operations by using the remote control
ENGLISH -
31
Basic Operation
Switching the input signal
Press this button to switch input signals.
Buttons
Press (<COMPUTER>, <HDMI>, <VIDEO>)
button on the remote control.
COMPUTER
Switches to Computer 1/
Computer 2 input.
HDMI
Switches to HDMI input.
VIDEO
Switches to Video input.
Note
For details, see “Selecting the input signal”. (
z
Æ
page 30)
<LAMP> button
Press this button to display the [Lamp Power Mode]
menu.
Button
Press the <LAMP> button on the remote
control.
Note
For details, see “Lamp Power Mode”. (
z
Æ
page 44)
<INFO.> button
Press this button to display the [Information] menu.
Button
Press the <INFO.> button on the remote
control.
Note
For details, see “Information”. (
z
Æ
page 44)
<FREEZE> button
This function allows you to temporarily freeze
the picture on the screen of the external devices,
meanwhile, volume is muted.
Button
Press the <FREEZE> button on the
remote control.
Fig.1 will appear on the screen while the Freeze
z
function is working.
Fig.1
Note
To cancel the Freeze function, press the <FREEZE>
z
button again.
<KEYSTONE> buttons
This function allows you to correct keystone distortion.
Buttons
Press the <KEYSTONE+> or
<KEYSTONE-> button on the remote
control.
Note
For details, see [V Keystone] in the [Position] menu
z
(
Æ
page 39)
z
z
z
z
Basic operations by using the remote control
To Next Page
Loading...
