Panasonic PT-LX321

Ceiling mount bracket safeguards
70
- ENGLISH
Appendix
Specications
Dimensions
<Unit : mm (inch)>
77.0 (3.03”)
90.8 (3.58”) 99.8 (3.93”)
288.0 (11.30”)
70.8 (2.79”)
48.0 (1.89”)
42.8 (1.69”)
47.8 (1.88”) 51.8 (2.04”)
220.1 (8.67”)
233.2 (9.18”) 〜 241.3 (9.50”)
231.1 (9.10”) 〜 236.3 (9.30”)
*1
*2
Actual dimension may differ by product. *1: PT-LX351U, PT-LX321U, PT-LX271U. :

*2: PT-LW321U, PT-LW271U.
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualied technician.
z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused
z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental
conditions.
Remove an unused ceiling mount bracket promptly.
z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
z
For details, see the work instruction manual packed together with the ceiling mount bracket.
z
The model Nos. of the accessories and the parts sold separately are subject to change without notice.
z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or
z
board) in the ceiling board. Otherwise it may result in re hazard.
Model No. of ceiling mount bracket:
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount bracket:
ET-PKL300B
M3 x 0.5
6 mm (0.24")
Torque:0.8 ± 0.1 N · m
Bottom view