Panasonic PT-RZ470EK

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 85
12) Press the <ENTER> button.
f The command is xed and n is displayed at the left of the selected command.
f After the command is xed, press the <RETURN> button or the <MENU> button to close the detailed setting menu.
13) Press as to select [STORE], and press the <ENTER> button.
Note
f When deleting commands that have already been set, press the <DEFAULT> button on the screen displayed in step 5).
f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f The operating time will be the local time. (x page 89)
f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with this function may not be executed.
[INITIAL STARTUP]
Set the startup method when the <MAIN POWER> switch is set to <ON>.
1) Press as to select [INITIAL STARTUP].
2) Press qw to switch [INITIAL STARTUP].
f The items will switch each time you press the button.
[LAST MEMORY] Starts the projector in the condition before the <MAIN POWER> switch is set to <OFF>.
[STANDBY] Starts in standby.
[ON] Starts projecting immediately.
[STARTUP INPUT SELECT]
Set the input when the projector is switched on to start projection.
1) Press as to select [STARTUP INPUT SELECT].
2) Press qw to switch [STARTUP INPUT SELECT].
f The items will switch each time you press the button.
[LAST USED] Keeps the input selected last.
[COMPUTER] Sets the input to COMPUTER.
[VIDEO] Sets the input to VIDEO.
[DVI-I] Sets the input to DVI-I.
[HDMI] Sets the input to HDMI.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[DIGITAL LINK INPUT]
Can only be selected when [STARTUP INPUT SELECT] is set to [DIGITAL LINK].
1) Press as to select [DIGITAL LINK INPUT].
2) Press qw to switch [DIGITAL LINK INPUT].
f The items will switch each time you press the button.
[CURRENT] Switches the input to DIGITAL LINK.
[INPUT1]
Switches to DIGITAL LINK input, and that input switches to the specied input when the Panasonic
twisted-pair-cable transmitter is connected.
[INPUT2]
[INPUT3]
[INPUT4]
[INPUT5]
[INPUT6]
[INPUT7]
[INPUT8]
[INPUT9]
[INPUT10]