Panasonic PT-TW230E

-22-
Mechanical Disassembly
6. Optical unit and duct assembly removal
Duct assy
A
B
C
Optical unit
A
B
C
C
C
C
D
D
D
D
D
D
D
D
Temp sensor A
board
T3x8
SW901
Lamp cover
switch
T3x12
T3x30
T3x30
T3x30
T3x12
T3x12
T3x30
FN903
FN904
FN902
FN901
Main board
holder
Panel duct
bottom
1. Remove 2 screws A(T3x8) to remove the main board holder.
2. Remove 2 screws B(T3x12) and 5 screws C(T3x8) and remove the optical
unit upward off.
3. Remove 9 screws D(T3x8) and remove the duct assembly upward off.
Fig.6
D