68 - ENGLISH
3) Press as to switch the setting time.
f The items will switch each time you press the button.
[0 Min] The ready mode of the power management function is continued.
[1 Min] ~ [30 Min]
From the ready mode of the power management function to the standby mode when the projector
reach the set time.
[Filter counter]
This function is used to reset the lter use time and set the warning display.
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Filter counter] Displays the using time of the lter.
[Timer]
Sets the time to display the warning
icon.
[Filter counter
reset]
Resets the lter counter.
Setting [Timer]
1) Press as to select [Timer].
2) Press the <ENTER> button.
3) Press as to switch the setting of the time.
f The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
[Filter counter reset]
1) Press as to select [Filter counter reset].
2) Press the <ENTER> button.
f The [Filter counter Reset?] screen is displayed.
3) Press as to select [Yes] and then press the <ENTER> button.
f The [OK?] screen is displayed.
4) Press as to select [Yes] and then press the <ENTER> button.
[Test pattern]
Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [Test pattern].
2) Press the <ENTER> button.
f The [Test pattern] screen is displayed.
3) Press as to switch the item.
Chapter 4 Settings - [Expand] menu
To Next Page
Loading...
