Input menu
40
- ENGLISH
Settings
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and
[PAL-N].
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among [480i], [576i], [480p], [576p], [720p], [1 035i]
and [1 080i].
Press ▲▼ to select [System].1 )
Press ► or the <ENTER> button to 2 )
access the submenu.
Press ▲▼ to select the desired system.3 )
Note
When the [Input Search] function is set to [On 1] or
z
[On 2] in the [Auto setup] function, the input signal
will be searched automatically.
The AV System Menu cannot be selected when
z
selecting [RGB (Scart)].
To Next Page
Loading...
