Example of connection for image transfer
Miracast Image transfer application software
Connection image
Projector
Miracast
Miracast compatible devices
(Example) Content display
Projector
Devices such as a computer that are installed with the
image transfer application software
(Example) Multi-screen display
Input
MIRRORING Panasonic APPLICATION
Communication
method
IEEE802.11n IEEE802.11a/b/g/n
Connection method
WPS + Wi-Fi Direct Panasonic proprietary + User connections
Image transmission
method
Miracast Panasonic proprietary
Projector settings
1) Turn on the power of the projector.
2) Select the [NETWORK/USB] menu → [WIRELESS LAN] from the main menu, and set it to other than
[DISABLE].
3) Press the <ENTER> button.
f The [WIRELESS DETAILED SETUP] screen is displayed.
4) Perform the connection setting.
f For details, refer to “[WIRELESS LAN]”. (Æ page 100)
Note
f Wireless LAN and wired LAN cannot be used in the same segment.
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
f Do not use ANY connection by setting “any” or “ANY” character string in SSID.
f The projector settings are not required when connecting Miracast compatible devices to the projector via MIRRORING. For details about
connecting with the MIRRORING function, refer to “Projecting with MIRRORING” (Æ page 136).
114 -
ENGLISH
Chapter 5 Operation of Function - Network connection
To Next Page
Loading...
