6. Select SUB TINT in EVR adjustment mode and increase level B 1
clicks above the same level.
Fig. E5-3
7. Select SUB BRIGHT in EVR adjustment mode and reset to the
original value.
7.3.10. DEFLECTION DISTORTION CORRECTION ADJUSTMENT
Purpose :
To set the optimum picture.
Symptom of Misadjustment :
The picture is distortion.
Test Point :
----------
Adjustment :
V POSITION (EVR),
V SIZE (EVR),
H-CENTER (EVR),
(For model with Flat 27 inch CRT)
R763 (Deflection C.B.A.),
R753 (Deflection C.B.A.),
R766 (Deflection C.B.A.)
42
To Next Page
Loading...
