1-16
[RESTORE]
1. Clicking on this button displays the message “Please Display MIDI BULK
Window at DA7” on your computer’s display.
2. Press the MIDI button in the SETUP section of the DA7’s Top Panel until
the [MIDI>BULK] window appears on the DA7’s LCD.
3. Click the [OK] button in the [Data Restore] window on the computer
display. The Source selection window appears.
4. Select a folder, then a file that you are going to move back into the DA7.
After making the selection, click the [OPEN] button.
To Next Page
Loading...
