DA7 Settings
• Confirm that [TO PC] is selected for [PORT SELECT] in [MIDI > SETUP]
window.
• Confirm that [38.4k] is selected for [BAUD RATE] in [MIDI > SETUP]
window.
• Confirm that [TO PC] is selected for PORT of [Gen Rx] and [Gen TX] in the
[MIDI > SETUP] window.
• Confirm that the RECEIVE channel of the Upgrade Utility is the same as the
TRANSMIT channel of the DA7. (CH of [Gen TX] in [MIDI > SETUP]
window)
• Confirm that the TRANSMIT channel of the Upgrade Utility is the same as
the RECEIVE channel of the DA7. (CH of [Gen RX] in [MIDI > SETUP]
window)
• Confirm that [TX] and [RX] are selected (inverse video) for [SYSTEM EX]
in the [MIDI > SETUP] window.
• Confirm that the [MIDI > BULK] window is displayed for BACKUP or
RESTORE.
• Confirm that you have correctly selected [RX] to ON in the [MIDI BULK]
window on the LCD display. Cursor to the [RX] field. Select [RX] and press
ENTER.
1-20
To Next Page
Loading...
