Panasonic RX-DT30 - Removal of the Connector P.C.B.; Removal of the Mechanism Unit; Removal of the Traverse Unit; Removal of the Main P.C.B.

RX-DT30
I
Ref. No.
5
Procedure
2*31,5
r- ~ ---~~~ -~~~ -~~~~
Removal of the Connector P.C.B.
1.. Remove
3 screws ( 0 - Q ).
2. Remove 4 connectors (CN1, CN304. CN305, CN801).
3. Remove the Connector P.C.B.
Ref. No.
6
~----I
Removal of the Mechanism Unit
_.~ ~~~ .~~~~~
Ref. No.
7
Removal of the Traverse Unit
FFC Cable
Traverse Unit
*
I
CN702
Remove 4 screws ( 0 - 0 ).
Remove FFC cable from the connector CN702 (Control P.C.B.)
CN1
CN305
;<
R
I
CN304
CN801
Connector P.C.B.
Mechanism Unit
1. Remove 2 connectors (CP301, CP602 )
2. Remove 6 screws ( @ - @ ).
Removal of the Main P.C.B.
Ref. No.
CP306
Main P.C.B.
1.. Remove 2 screws (8 -@ ).
2. Remove 1 connector (CP306).
3.
Pull
out the main P.C.B. in the direction of arrow.
-6-