Panasonic S-200PE1E8 - Capacity Correction Graph According to Temperature Condition

1-14
1
1.0 1.0 0.97 0.96 0.96 0.95 0.94 0.890.91 0.88 0.87 0.870.87 0.88 0.89
-20 -15 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 6543
1.00.950.91 0.92
60
80
80
60
40
100
120
140
352515545-15
100
120
-5 -10 5010-5
120
40
60
80
100
120
40
60
80
100
15-15-20
0
0
20
40
60
80
100
120
140
20
40
60
80
100
120
140
0
0
20
40
60
80
100
120
140
20
40
60
80
100
120
140
4 6 8 10 12 14 16 18 20 22 24 264 6 8 10 12 14 2016 18 22 24
46 8101214 2016 18 22 24 26 28 30 4 6 8 10 12 14 2016 18 22 24 26 28 30 32
Input coefficient (%) Capacity coefficient (%) Input coefficient (%) Capacity coefficient (%)
Cooling capacity ratio (maximum capacity) Heating capacity ratio (maximum capacity)
1-7. Capacity Correction Graph According to Temperature Condition
U-200PE1E8 / U-250PE1E8 (For 50 Hz and 60 Hz)
Indoor air intake temp (WB)
22WB
19WB
16WB
22WB
19WB
16WB
Indoor air intake temp (WB)
Outdoor air intake temp (°C DB)
16
°C
20
°C
24
°C
Outdoor air intake temp (°C DW)
24
°C
20
°C
16
°C
125%
U-200PE1E8
Power consumption ratio (%)
Capacity (kW)
Rated capacity ratio for cooling
121%
Power consumption ratio (%)
Capacity (kW)
Rated capacity ratio for heating
123%
U-250PE1E8
Power consumption ratio (%)
Capacity (kW)
Rated capacity ratio for cooling
125%
Power consumption ratio (%)
Capacity (kW)
Rated capacity ratio for heating
1. The graphs " " of the characteristics show the value under the following conditions.
Equivalent tubing length : 7.5m
Difference of elevation : 0m
Wind speed : High
2. " " marking indicates the maximum capacity / maximum power consumption under the JIS condition.
Maximum capacity indicates the maximum value in the parentheses of the specifications (cooling and heating capacity).
3. The characteristic of heating capacity excludes the decline of capacity when frosting (including defrost drive).
NOTE 1
1. The graphs " " of the characteristics show the value under the following conditions.
Equivalent tubing length : 7.5m
Difference of elevation : 0m
Wind speed : High
2. "
" marking indicates the rated capacity / rated power consumption under the JIS condition.
" " marking indicates the maximum capacity / maximum power consumption under the JIS condition.
3. The characteristic of heating capacity excludes the decline of capacity when frosting (including defrost drive).
NOTE 2
To calculate the heating capacity with consideration for frosting/defrosting operation, multiply the heating
capacity found from the capacity graph by the correction coefficient from the table above.
Outdoor unit heating capacity correction coefficient during of frosting/defrosting (RH approximately 85%)
Outdoor intake air
temperature
°C WB
Correction coefficient
Indoor air intake temp (
°C
WB)
Indoor air intake temp (
°C
WB)
SM830194-02BigPAC-i.indb14SM830194-02BigPAC-i.indb14 2012/09/0311:23:362012/09/0311:23:36