101
Case B and Case D are shown below.
For Case B, replace the cover plates in the procedure shown in the figure.
Type 71
1. Remove the cover plate.
Cover plate
2. Attach the cover plate and the support plate removed in step 1 and filters (accessories) in the direction shown in
the figure below.
B
Filters (Accessories)
Screws
Cover plate
3. Attach the filters (accessories) in the manner shown in the figure.
Securely fix the filters with the screws.
Filter
Attach the filter to the main unit
while pushing the tip of the latches
in the direction of the arrow.
View B
Main unit
To Next Page
Loading...
