EasyManua.ls Logo

Panasonic SA-HT640WP - Page 2

Panasonic SA-HT640WP
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(1) DVD [DVD-Video, DVD-Audio]
(2) DVD-RAM [DVD-VR, JPEG(*4,5)]
(3) DVD-R [DVD-Video]
(4) DVD-RW [DVD-Video]
(5) +R/+RW [Video]
(6) CD, CD-R/RW [CD-DA, Video CD, SVCD(*1), MP3(*2,5),
WMA(*3,5), JPEG(*4,5), HighMAT Level 2 (Audio and
Image)]
*1 Conforming to IEC62107
*2 MPEG-1 Layer 3, MPEG-2 Layer 3
*3 Windows Media Audio Ver.9.0 Class 2A
lNot compatible with Multiple Bit Rate (MBR)
*4 Exif Ver 2.1 JPEG Baseline files
lPicture resolution: between 320 x 240 and 6144 x 4096
pixels (Sub sampling is 4:2:2 or 4:2:0). Extremely long and
thin pictures may not be displayed.
*5 The total combined maximum number of recognizable audio
and picture contents and groups: 4000 audio and picture
contents and 400 groups.
Pick up:
Wavelength:
lCD: 785nm
lDVD: 662nm
Laser power:
lCD: CLASS I
lDVD: CLASS II
Audio output (DISC):
Number of channels:
5.1 ch (FL, FR, C, SL, SR,
SW)
Audio performance:
Frequency response:
DVD (linear audio):
4 Hz-22 kHz (48 kHz sampling)
4 Hz-44 kHz (96 kHz sampling)
DVD-Audio: 4 Hz-88 kHz (192 kHz
sampling)
CD-Audio: 4 Hz-20 kHz
S/N ratio:
CD-Audio: 105 dB
Dynamic range:
DVD (linear audio):
95 dB
CD-Audio: 95 dB
Total harmonic distortion:
CD-Audio:
0.005 %
lVideo section
V
ideo system:
Signal system: NTSC
Composite video output:
Output level: 1 Vp-p (75 )
Terminal: Pin jack (1 system)
S-video output:
Y
output level: 1 Vp-p (75 )
C output level: NTSC; 0.286 Vp-p (75 )
Terminal S terminal (1 system)
Component video output (480p/480i):
Y
output level: 1 Vp-p (75 )
P
B
output level: 0.7 Vp-p (75 )
P
R
output level: 0.7 Vp-p (75 )
Terminal: Pin jack (Y: green, P
B
: blue,
P
R
: red) (1 system)
Power consumption in standby mode:
approx 0.4W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
Mechanism:
This model uses RC1 (Rotary tray) mechanism.
Refer to the original service manual for *1, *2, *3, *4.
2
SA-HT640WP / SA-HT640WPC

Table of Contents

Related product manuals