System
controller
version
Destination
System controller
generation
Region
Region No.
N: noPAL / P: PAL
N: NTSC / 6: PAL60
Panel
controller
jumper
information
Micro-processor firmware version
display & EEPROM checksum display.
Micro-processor
firmware version
display &
EEPROM
checksum
display.
Initialization
Cancelled automatically
5 seconds later.
Cancelled automatically
5 seconds later.
DVD (HDMI) module
firmware version is displayed on the
FL Display.
Region display & mode
DVD (HDMI)
module
firmware
version display
Region display
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press STOP button
on the player, and "7"
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player , and
10
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player, and "6"
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player, and "8"
button on the remote
control unit.
Initialization
User settings are cancelled and player
is initialized to factory setting.
Cancelled automatically
5 seconds later.
Displays frequency of communication
errors between system control IC and
mechanism control IC during DVD
module.
Communication
error display
In STOP (no disc)
mode, press STOP button
on the player, and "MENU"
button on the remote
control unit.
Press "FL Display" button on
remote control unit for next
page. (FL Display)
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
DVD Module
Reset
To reset DVD Module. (After
initialisation) Refer to Section 9.5.3 for
more information.
Cancelled automatically
5 seconds later.
While in initialization
mode, press & hold STOP
button on player follow by
"ENTER" button on remote
control unit.
29
SA-HT640WP / SA-HT640WPC
To Next Page
Loading...
