both Sides A and B. Both tapes are halfway forwarded in advance.
3. The remote controller that comes with this unit.
5.2. Setting of the Self-Diagnostic Mode
5.3. Restoring Normal Display
- From the F76 display, the normal display does not appear till an
error is recovered.
- For displays other than F76, press “POWER” button to turn off the
power, and then turn on the power.
5.4. Clearing Self-Diagnostic Memory
<CD Section> (F15, F17, F22, F26, F27, F28, F29)
1. Enter a self-diagnostic mode.
2. Press " /-DEMO" button. A symbol of self-diagnostic is indicated
on the display if an error is found. If several errors are found, a
7
To Next Page
Loading...
