Step 8 Remove 2 screws at the rear panel.
Step 9 Release the tab of the rear panel in the direction of
arrow.
Step 10 Remove DVD Module P.C.B.
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
7.29. Disassembly of Coprocessor
P.C.B.
•
• •
• Follow (Step 1) to (Step 3) of Item 7.3.
•
• •
• Follow (Step 1) to (Step 8) of Item 7.14.
Step 1 Detach Coprocessor P.C.B. at the connector (CN2014)
on Main P.C.B.
Step 2 Remove Coprocessor P.C.B.
38
SA-PT465EE
To Next Page
Loading...
