34
6.3.5. iPod Error Code Table
Error
Code
Over current occurs in
power supply for iPod
charging
In normal operation when IPOD_OC is
detected L (Low) for two consecutive
times) the message will display on FL
once and power supply to iPod shall be cut.
This error shall be displayed as "IPOD OC"
when checking occurred error messages
during self diagnostic.
IPOD OVER
CURRENT ERROR
(scrolling)
Switch to DVD/CD mode,
remove iPod and turn off
the unit. This is later follow
by turning on the unit.
Diagnosis Contents Description of error Automatic FL Display Remarks
To Next Page
Loading...
