5
Connections
RQT7994
SettingsBasic Operations Before useOperationsReference
High picture quality connection
Use this connection instead of the VIDEO IN/VIDEO OUT connections on page 4. A COMPONENT VIDEO connection provides a purer picture than a
S-VIDEO connection. Select a S-VIDEO or COMPONENT VIDEO connection to match the peripheral equipment.
Video input can only be output again through the same type of terminal.
Preparation: Turn off all components before making any connections.
Connection cable (All cables are sold separately)
Audio cable Video cable
Stereo connection cable
You can enjoy analog sound.
Video connection cable
Use to connect to the TV MONITOR
terminals for a standard picture. Can also
be used to make a COMPONENT VIDEO
connection for a higher quality picture than
an S-VIDEO connection.
Coaxial cable
Optical fiber cable
You can enjoy digital sound such
as Dolby Digital, DTS and PCM.
• Do not sharply bend the optical
fiber cable.
S-VIDEO connection cable
You can enjoy a higher quality picture than
with a video connection cable.
DVD ANALOG 6CH connection
White (L)
Red (R)
SUBWOOFER
FRONT
CENTER
SURROUND
L
R
VIDEO OUT
DVD player
L
R
You can play high fidelity
sound such as DVD-Audio.
You need to make additional
connections for this.
áRefer to page 14 for
“Playing DVD-Audio”.
Peripheral equipment sold separately unless otherwise indicated.
To connect equipment, refer to the appropriate operating instructions.