Panasonic SB-PF310 - Controls and Self-Diagnostic Function; Displaying and Redisplaying Malfunction Codes

5. Location of Controls
6. Self-Diagnostic Function
This unit is equipped with a self-diagnostic function which, in the event of a malfunction,
automatically displays a code indicating the nature of the malfunction.
Use this self-diagnostic function when servicing the unit.
6.1. To display the malfunction code
U70 DVD:
Automatically displays on the AV control receiver when a
malfunction occurs. Refer to Fig. 6-1.
F61: / F76:
Automatically displays on the AV control receiver when a
malfunction occurs. Refer to Fig. 6-1.
Fig. 6-1.
6.2. To redisplay the malfunction code
1. For U70 DVD
- Press some operation buttons on the AV control receiver.
- To redisplay the code, switch the power off (Standby/on
button), and then switch power back on again.
2. For F61/F76
- If F61/F76 is displayed, the power will automatically be
switched off and the standby indicator will light up.
- F61/F76 will be displayed for a second, and then the clock will
be displayed.
- To redisplay the code, switch the power on. F61/F76 will be
redisplayed, and then the clock will be displayed and the
6