K
Kelsey MillerJul 30, 2025
What to do if Panasonic Stereo System display lights up in standby mode?
- BBrad HuertaJul 30, 2025
If the display of your Panasonic Stereo System lights up and changes continuously while in standby mode, try the following: Turn off the demo function, turn the volume up, check the speaker connections, check and correct the speaker cords connection, set the time, read the instructions and try again. If the issue persists, switch off the unit, determine and correct the cause (such as shorted speaker wires or excessive volume), then switch it back on. If this does not fix the problem, there is a power supply problem. Consult the dealer.