Panasonic SC-ALL9

SQT1211
21
3 Attach the wall mount brackets to
the wall, and then hook the unit
securely onto them.
≥ Make sure that the wall and the screws are capable
of supporting at least 50 kg.
≥ Use a level to ensure both wall mount brackets are
level.
≥ Connect the AC mains lead to the unit before
hanging the unit onto the wall. (l 6)
4 Drive a screw to secure the safety
holder onto the wall.
≥ Refer to step 3 for requirements before screwing.
5 Attach the fall prevention cord to the
wall.
≥ Make sure that the slack of the cord is minimal.
At least 30 mm
‰7.5 mm to
‰9.4 mm
‰4mm
Wall mount bracket
(supplied)
Screw (not supplied)
Space required
A 573 mm
B 524 mm
C 407 mm
D 156 mm
E 248 mm
13 mm
Screw
(not supplied)
Safety holder (supplied)
Fix to the wall
Cord (not supplied)
Wall anchor (not supplied)
Wall
SC-ALL9&6-SQT1211_mst.book 21 ページ ２０１６年１月１２日 火曜日 午後３時１６分