6
SQT1211
Connections
≥ This unit consumes a small amount of AC power (l 26)
even when turned off.
≥ For the purpose of power conservation, disconnect the
power supply if you will not be using it for extended
period of time.
Some settings will be lost after you disconnect the
system. You have to set them again.
≥ This speaker does not have magnetic shielding. Do not
place them near a TV, PC or other magnetic devices.
≥ Do not disconnect the AC mains lead when the unit is on.
Doing so may cause malfunction or damage.
≥ For details, refer to the operating instructions of the
device.
[SC-ALL6]
Installation
This unit can be installed either vertically or
horizontally.
Install the unit with the speaker feet side down
as shown below.
Automatic standby mode
This unit is designed to conserve its power
consumption and save energy.
The unit will turn to standby mode
automatically if there is no sound and it is not
being used for approximately 20 minutes.
≥ The operation indicator (amber) blinks for
approximately 1 minute before the unit turns to
standby mode. Touch any switch to cancel it.
[SC-ALL9] [SC-ALL6]
To a household mains socket
AC mains lead
(supplied)
Connection of an external
device
Audio cable (not supplied)
Plug type:
3.5 mm stereo
Vertical Horizontal
Speaker feet Speaker feet
SC-ALL9&6-SQT1211_mst.book 6 ページ ２０１６年１月１２日 火曜日 午後３時１６分
To Next Page
Loading...
