20
SQT1211
[SC-ALL9]
Attaching to a wall
(optional)
Consult a qualified building contractor when
attaching the unit to a wall.
Preparation
≥ Turn the unit off and disconnect the AC mains
lead from the AC outlet.
≥ Make sure the location to place the unit has a
stable Wi-Fi connection. (l 19)
1 Fix the safety holder onto the unit.
≥ Screw tightening torque: 50 N0cm to 70 N0cm.
2 Attach the fall prevention cord to the
unit.
≥ Use a cord that is capable of supporting over 50 kg
with a diameter of about 1.5 mm.
WARNING
≥ To prevent injury, this apparatus must
be securely attached to the wall in
accordance with the installation
instructions.
≥ Keep the safety holder, the screws, and
the wall mount brackets out of reach of
children to prevent swallowing.
Screw (supplied)
Safety holder (supplied)
Soft blanket or cloth
Cord
(not supplied)
SC-ALL9&6-SQT1211_mst.book 20 ページ ２０１６年１月１２日 火曜日 午後３時１６分
To Next Page
Loading...
