13
Getting started
VQT4Q15
STEP 2: Preparing the speakers
[BTT880] [BTT480] Front speakers, Surround speakers [BTT460] Front speakers
1 Attach the stand to the base.
2 Tighten the 3 screws (supplied) securely.
3 Slide the speaker cable into the groove.
4 Attach the speaker.
5 Tighten the screw (supplied) securely.
≥ After connecting the speaker cable (> 14),
press the cable into the groove.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Assembling the speakers
Thread the speaker
cable through the
base.
SC-BTT880&480&460&400&300GNGSGA-VQT4Q15_mst.book 13 ページ ２０１２年１２月４日 火曜日 午後３時５０分
To Next Page
Loading...
